For our anti-theft equipment, which is the detector, turn on the detection power before opening every day, and the indicator light on the power control box will light up. At this time, the internal self-inspection of the equipment will start, and the system will enter normal operation after the self-inspection is completed in about one minute. At this time, our loss prevention personnel can carry out the detection with the anti-theft label. Hands hang down naturally, the plane of the anti-theft label is level with the anti-theft device, and then pass through the anti-theft device at a normal speed 1 meter away from the device. The anti-theft device can trigger an alarm and send out sound and light reminders, which means that the device is working normally. If there is no alarm, you can repeat it several times. Turn off the detection power supply or the main power supply when the store is closed every day.
As for the decoder, the cashier needs to turn on the power of the decoder before opening, the power indicator light on the decoder is on, and the indicator light on the decoder board is on. At this time, take the label and pass it through the decoder board (5-10cm height) at a normal speed. After using it, you can hear the beep from the decoder, indicating that the device is working normally (if the device does not have a sound or indicator light, it can be ignored).
Every worker in our supermarket is serving you every day. I hope these anti-theft tips can help you.