How should a clothing store install an anti-theft device

We often go to clothing stores. Many clothing store merchants now install anti-theft devices that are popular in the market in order to prevent theft of goods in the store. Today, I will introduce to you how to install anti-theft devices  in clothing stores. Come and have a look.
First of all, clothing stores should pay attention to the scene environment when installing anti-theft devices . Clothing stores need to give people a noble and down-to-earth experience, so the aesthetic requirements are usually high when installing anti-theft devices. It is recommended to choose an anti-theft sensor made of acrylic transparent material. The detection distance is required to be arranged according to the size and exit of the clothing store. Secondly, in the selection system, it is recommended to use the acousto-magnetic anti-theft system, because the acousto-magnetic anti-theft system has a wider detection distance than the radio frequency anti-theft system, and the label appearance is relatively small and more concealed. For clothing stores that require cheap prices or relatively small layouts, you can also choose a more affordable radio frequency anti-theft system, but the effect is not as good as the sound and magnetic anti-theft system.

It is also recommended to stand the anti-theft device of the clothing store at the position where it needs to be installed when installing, and do not blindly fix the base with expansion screws. After connecting the wires, turn on the power and conduct an environmental test before fixing them, so as to avoid the trouble of removing the distance involved in the subsequent wiring. When wiring, first pass the power line and signal connection line through the hole at the bottom of the fixing bracket, and connect them correctly. The connection interface at the bottom of the anti-theft device. There are 3 plug-in interfaces on the main board at the bottom of the main unit, of which 3 holes are connected to the power supply, and the other 2 6-holes are connected to the signal output of the auxiliary machine; The 6 holes are connected to the host signal input. After the wiring is completed, fix the connecting wire screws, fix the fixing bracket on the floor with expansion screws, and insert the anti-theft sensor into the base fixing frame to complete the installation. Then use the anti-theft label to test it, and then it can be used normally. , Remember that the power supply of the anti-theft device in the clothing store should use an independent power supply.